debug ip ospf adj
版权声明：原创作品，允许转载，转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。http://coolboy.blog.51cto.com/339135/69125 |
*Mar 1 00:09:10.579: OSPF: Rcv DBD from 10.0.0.1 on FastEthernet0/0 seq 0x1F3C opt 0x52 flag 0x7 len 32 mtu 1500 state INIT *Mar 1 00:09:10.579: OSPF: 2 Way Communication to 10.0.0.1 on FastEthernet0/0, state 2WAY *Mar 1 00:09:10.579: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:10.579: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:10.579: OSPF: Elect BDR 0.0.0.0 *Mar 1 00:09:10.583: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:10.583: DR: 10.0.0.3 (Id) BDR: none *Mar 1 00:09:10.583: OSPF: Send DBD to 10.0.0.1 on FastEthernet0/0 seq 0x25F9 o pt 0x52 flag 0x7 len 32 *Mar 1 00:09:10.583: OSPF: First DBD and we are not SLAVE *Mar 1 00:09:10.671: OSPF: Rcv DBD from 10.0.0.2 on FastEthernet0/0 seq 0x198D opt 0x52 flag 0x7 len 32 mtu 1500 state INIT *Mar 1 00:09:10.671: OSPF: 2 Way Communication to 10.0.0.2 on FastEthernet0/0, state 2WAY *Mar 1 00:09:10.671: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09: Router#10.675: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:10.675: OSPF: Elect BDR 0.0.0.0 *Mar 1 00:09:10.675: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:10.675: DR: 10.0.0.3 (Id) BDR: none *Mar 1 00:09:10.675: OSPF: Send DBD to 10.0.0.2 on FastEthernet0/0 seq 0x164 op t 0x52 flag 0x7 len 32 *Mar 1 00:09:10.675: OSPF: First DBD and we are not SLAVE *Mar 1 00:09:10.679: OSPF: Rcv DBD from 10.0.0.1 on FastEthernet0/0 seq 0x25F9 opt 0x52 flag 0x2 len 92 mtu 1500 state EXSTART *Mar 1 00:09:10.679: OSPF: NBR Negotiation Done. We are the MASTER *Mar 1 00:09:10.679: OSPF: Send DBD to 10.0.0.1 on FastEthernet0/0 seq 0x25FA o pt 0x52 flag 0x3 len 52 *Mar 1 00:09:10.679: OSPF: Database request to 10.0.0.1 *Mar 1 00:09:10.683: OSPF: sent LS REQ packet to 10.0.0.1, length 36 *Mar 1 00:09:10.735: OSPF: Rcv DBD from 10.0.0.2 on FastEthernet0/0 seq 0x164 o pt 0x52 flag 0x2 len 92 mtu 1500 state EXSTART *Mar 1 00:09:10.735: OSPF: NBR Negotiation Done. We are the MASTE Router#R *Mar 1 00:09:10.735: OSPF: Send DBD to 10.0.0.2 on FastEthernet0/0 seq 0x165 op t 0x52 flag 0x3 len 52 *Mar 1 00:09:10.739: OSPF: Database request to 10.0.0.2 *Mar 1 00:09:10.739: OSPF: sent LS REQ packet to 10.0.0.2, length 36 *Mar 1 00:09:10.927: OSPF: Rcv DBD from 10.0.0.1 on FastEthernet0/0 seq 0x25FA opt 0x52 flag 0x0 len 32 mtu 1500 state EXCHANGE *Mar 1 00:09:10.927: OSPF: Send DBD to 10.0.0.1 on FastEthernet0/0 seq 0x25FB o pt 0x52 flag 0x1 len 32 *Mar 1 00:09:11.031: OSPF: Rcv DBD from 10.0.0.2 on FastEthernet0/0 seq 0x165 o pt 0x52 flag 0x0 len 32 mtu 1500 state EXCHANGE *Mar 1 00:09:11.031: OSPF: Send DBD to 10.0.0.2 on FastEthernet0/0 seq 0x166 op t 0x52 flag 0x1 len 32 *Mar 1 00:09:11.167: OSPF: Rcv DBD from 10.0.0.1 on FastEthernet0/0 seq 0x25FB opt 0x52 flag 0x0 len 32 mtu 1500 state EXCHANGE *Mar 1 00:09:11.167: OSPF: Exchange Done with 10.0.0.1 on FastEthernet0/0 *Mar 1 00:09:11.171: OSPF: Synchronized with 10.0.0.1 on FastEthernet0/0, state FULL Router# *Mar 1 00:09:11.171: %OSPF-5-ADJCHG: Process 10, Nbr 10.0.0.1 on FastEthernet0/ 0 from LOADING to FULL, Loading Done *Mar 1 00:09:11.239: OSPF: Rcv DBD from 10.0.0.2 on FastEthernet0/0 seq 0x166 o pt 0x52 flag 0x0 len 32 mtu 1500 state EXCHANGE *Mar 1 00:09:11.239: OSPF: Exchange Done with 10.0.0.2 on FastEthernet0/0 *Mar 1 00:09:11.239: OSPF: Synchronized with 10.0.0.2 on FastEthernet0/0, state FULL *Mar 1 00:09:11.239: %OSPF-5-ADJCHG: Process 10, Nbr 10.0.0.2 on FastEthernet0/ 0 from LOADING to FULL, Loading Done *Mar 1 00:09:11.671: OSPF: Build router LSA for area 0, router ID 10.0.0.3, seq 0x80000002 *Mar 1 00:09:11.671: OSPF: Build network LSA for FastEthernet0/0, router ID 10. 0.0.3 *Mar 1 00:09:11.671: OSPF: Build network LSA for FastEthernet0/0, router ID 10. 0.0.3 *Mar 1 00:09:13.391: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:13.391: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:13.391: OSPF: Elect BDR 10.0.0.1 *Mar 1 Router#00:09:13.391: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:13.391: DR: 10.0.0.3 (Id) BDR: 10.0.0.1 (Id) *Mar 1 00:09:13.395: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:13.395: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:13.395: OSPF: Elect BDR 10.0.0.1 *Mar 1 00:09:13.395: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:13.395: DR: 10.0.0.3 (Id) BDR: 10.0.0.1 (Id) Router# *Mar 1 00:09:15.463: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:15.463: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:15.463: OSPF: Elect BDR 10.0.0.2 *Mar 1 00:09:15.463: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:15.463: DR: 10.0.0.3 (Id) BDR: 10.0.0.2 (Id) *Mar 1 00:09:15.467: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:15.467: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:15.467: OSPF: Elect BDR 10.0.0.2 *Mar 1 00:09:15.467: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:15.467: DR: 10.0.0.3 (Id) BDR: 10.0.0.2 (Id) Router# *Mar 1 00:09:23.235: OSPF: Neighbor change Event on interface FastEthernet0/0 *Mar 1 00:09:23.235: OSPF: DR/BDR election on FastEthernet0/0 *Mar 1 00:09:23.235: OSPF: Elect BDR 10.0.0.2 *Mar 1 00:09:23.235: OSPF: Elect DR 10.0.0.3 *Mar 1 00:09:23.235: DR: 10.0.0.3 (Id) BDR: 10.0.0.2 (Id) 本文出自 “cisco windows linu” 博客，请务必保留此出处http://coolboy.blog.51cto.com/339135/69125 本文出自 51CTO.COM技术博客 |
yiaozi
博客统计信息
热门文章
最新评论
友情链接